<thead id="ardgx"></thead>

      <ruby id="ardgx"></ruby>
      <output id="ardgx"><sup id="ardgx"><listing id="ardgx"></listing></sup></output>

    1. 會員特享

      會員特享

      歷經10年的行業積累,威能檢驗已為全球多個國家的客戶提供優質的檢驗服務.

      技術標準

      API, ISO, GB,SY,ASME,ASNT, ASTM, NACE, AWS, JB, DNV,DIN,AAR, AISI, AISC, ANSI, AREA,
      AS, BS, CSA, IBR, JIS, MIL, MSS, NEPA, OCIMF, SSPC, TEMA, ABS, BV, Aramco’s AMSS/AIP/AES/ACS,
      以及客戶所定標準。

      • API Spec 5CRA Specification for Corrosion-resistant Alloy Seamless Tubes for Use as Casing, Tubing, and Coupling Stock
        API RP 5SI Recommended Practice for Purchaser Representative Surveillance and/or Inspection at the Supplier
        API RP 2SIM Structural Integrity Management of Fixed Offshore Structures
        API TR 941 The Technical Basis Document for API RP 941
        API Std 6ACRA Nickel Base Alloy 718 (UNS N07718) for Oil and Gas Drilling and Production Equipment Second Edition [Superseded: API SPEC 6A718, API SPEC 6A718]
        API Std 682 Pumps—Shaft Sealing Systems for Centrifugal and Rotary Pumps
        API Std 681 Liquid Ring Vacuum Pumps and Compressors for Petroleum, Chemical, and Gas Industry Services
      • ASTM B21 Standard Specification for Naval Brass Rod, Bar, and Shapes
        ASTM B171 Standard Specification for Copper-Alloy Plate and Sheet for Pressure Vessels, Condensers, and Heat Exchangers
        ASTM C892 Standard Specification for High-Temperature Fiber Blanket Thermal Insulation
        ASTM C1498 Standard Test Method for Hygroscopic Sorption Isotherms of Building Materials
        ASTM C552 Standard Specification for Cellular Glass Thermal Insulation
        ASTM C351 Standard Test Method for Mean Specific Heat of Thermal Insulation
        ASTM C518 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
      • ASME Y14.6 Screw Thread Representation螺紋表示法
        ASME PTC 10 Compressors and Exhausters壓縮機和排氣機
        ASME BPVC XII 2017 ASME Boiler and Pressure Vessel Code, Section XII: Rules for Construction and Continued Service of Transport Tanks 運輸罐建造和延續使用規則
        ASME BPVC IX ASME Boiler and Pressure Vessel Code, Section IX: Welding and Brazing Qualifications 焊接和釬焊評定標準
        ASME BPVC VIII-3 ASME Boiler and Pressure Vessel Code (BPVC), Section VIII, Division 3: Alternative Rules for Construction of High Pressure Vessels ASME 第VIII卷第三冊 高壓容器建造規則
        ASME BPVC VIII-2 ASME Boiler and Pressure Vessel Code, Section VIII, Division 2: Alternative Rules ASME第VIII卷第二冊 壓力容器建造另一規則
        ASME BPVC VIII-1 ASME Boiler and Pressure Vessel Code, Section VIII, Division 1: Rules for Construction of Pressure Vessels ASME第VIII卷第一冊 壓力容器建造規則
      • NACE SP0490 (formerly RP0490) Holiday Detection of Fusion-Bonded Epoxy External Pipeline Coating of 250 to 760 μm (10 to 30 mil)
        NACE SP0394 (formerly RP0394) Application, Performance, and Quality Control of Plant-Applied, Fusion-Bonded Epoxy External Pipe Coating
        NACE TM0284 Standard Test Method - Evaluation of Pipeline and Pressure Vessel Steels for Resistance to Hydrogen-Induced Cracking 管道、壓力容器抗氫致開裂鋼性能評價的試驗方法
        NACE TM0177 Laboratory Testing of Metals for Resistance to Sulfide Stress Cracking and Stress Corrosion Cracking in H2S Environments H2S環境中抗特殊形式的環境開裂材料的實驗室試驗方法
        NACE MR0176 Metallic Materials for Sucker-Rod Pumps for Corrosive Oilfield Environments
        NACE MR0175/ISO 15156 Petroleum and natural gas industries —Materials for use in H2S-containing environments in oil and gas production
      • ISO 9906 Rotodynamic pumps — Hydraulic performance acceptance tests — Grades 1, 2 and 3
        ISO 8503-4 Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned steel substrates -- Part 4: Method for the calibration of ISO surface profile comparators and for the determination of
        ISO 8503-2 Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates —Part 2:Method for the grading of surface profile of abrasive blast-cleaned steel —Comparator procedure
        ISO 8503-1 Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned steel substrates -- Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of ab
        ISO 8502-3 Preparation of steel Substrates before application of paint and related products - Tests for the assessment of surface cleanliness - Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape met
        ISO 8501-4 Preparation of steel substrates before application of paints and related products -- Visual assessment of surface cleanliness -- Part 4: Initial surface conditions, preparation grades and flash rust grades in connection with high-pressure water jetting
        ISO 8501-3 Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 3: Preparation grades of welds, edges and other areas with surface imperfections
      • GB5908-2005 石油儲罐阻火器
        GB/T9112 鋼制管法蘭 類型與參數
        GB/T9109.2 石油和液體石油產品動態計量 第2部分:流量計安裝技術要求
        GB/T4980 容積式壓縮機噪聲的測定
        GB/T11352 一般工程用鑄造碳鋼件
        GB/T 985.2 埋弧焊的推薦坡口
        GB/T 985.1 氣焊、焊條電弧焊、氣體保護焊和高能束焊的推薦坡口
      • JB/T8473 儀表閥組
        JB/T 10563 一般用途離心通風機技術條件
        JB/T 9244 玻璃板液位計
        JB/T 9218 滲透探傷方法
        JB/T 9092 閥門的檢驗與試驗
        JB/T 9078.2 天然氣分離設備 性能試驗方法
        JB/T 9078.1 天然氣分離設備 技術條件
      • SY/T 10042 海上生產平臺管道系統設計和安裝的推薦作法
        SY/T 10041 石油設施電氣設備安裝一級一類和二類區域劃分
        SY/T 10037 海底管道系統
        SY/T 10031 寒冷條件下結構和海管規劃、設計和建造的推薦作法
        SY/T 10030 海上固定平臺規劃.設計和建造的推薦作法.工作應力設計法
        SY/T 10025 海洋鉆井裝置作業前檢驗規范
        SY/T 10024 井下安全閥系統的設計、安裝、修理和操作的推薦作法
      • NB/T 47039 可變彈簧支吊架
        NB/T 47038 恒力彈簧支吊架
        NB/T 47034 工業鍋爐技術條件
        NB/T 47019.1 鍋爐、熱交換器用管訂貨技術條件_第1部分:通則
        NB/T 47018.7 承壓設備用焊接材料訂貨技術條件 第7部分:鈦及鈦合金焊絲和填充絲
        NB/T 47018.6 承壓設備用焊接材料訂貨技術條件 第6部分:鋁及鋁合金焊絲和填充絲
        NB/T 47018.5 承壓設備用焊接材料訂貨技術條件 第5部分:堆焊用不銹鋼焊帶和焊劑
          登錄查看全部    

      客戶滿意度調查

      非常感謝您在過去的日子里對“威能檢驗”的大力支持和信任!
      在今后的日子里,“威能檢驗”將一如既往的站在客戶的立場,為客戶的利益盡職盡責,爭取客戶最大的滿意,客戶的完全滿意是我們奮斗的目標。
      為了進一步了解、分析客戶對我們服務的滿意度狀況,貫徹“服務只有起點沒有終點”的服務宗旨,我們將開展客戶滿意度調查活動。
      您的任何有價值的意見和建議都是“威能檢驗”的寶貴財富,并將激勵我們不斷改善提高,最終為您提供更優質的廣告資源和更滿意的服務。

      為了能更好的與您溝通,讓我們的合作更愉快,請詳細填寫如下信息:(必填)

          登錄    
      亚洲成AV人片在线观看无

        <thead id="ardgx"></thead>

          <ruby id="ardgx"></ruby>
          <output id="ardgx"><sup id="ardgx"><listing id="ardgx"></listing></sup></output>